The ceramic rubber composite plate adopts an advanced hot vulcanization process, and the alumina ceramic plate or mosaic or spherical wear-resistant ceramic block is vulcanized through rubber and steel plate to form a ceramic-rubber-steel composite wear-resistant ceramic-rubber composite plate. It combines the advantages of high hardness and wear resistance of ceramics with high cushioning and fatigue resistance of rubber and the connection and fixing strength of steel plates, which can well solve the problem of equipment wear during the transportation of bulk materials. The addition of rubber not only makes the composite panel have a good anti-wear and anti-corrosion effect, but also prevents production stoppage caused by material accumulation and clogging, and effectively reduces environmental noise. The three-in-one composite plate is equipped with bolts for easy installation, mainly used for square chutes, blanking pipes, block blanking point protection, dock conveying equipment, and mine transfer equipmentFeatures:

1. Impact resistance: alumina wear-resistant ceramic lining rubber has good cushioning performance, which can effectively buffer the impact caused by the fall of ore from a high altitude, and the wear-resistant ceramic lining is wear-resistant, because the main raw material of the product is alumina performance, but the toughness is insufficient, when the impact reaches a certain level, wear-resistant ceramic rubber composite plate must be selected;

2. Non-sticking and non-blocking: Due to the high strength and corrosion resistance of ceramics, the phenomenon of equipment sticking and blockage is effectively solved. Traditional nylon cloth is often stained with materials, which affects work efficiency;

3. Ceramic rubber composite panel has strong wear resistance, impact resistance and corrosion resistance. Rubber elastomers have a good damping effect, which can reduce the noise generated during the transportation of materials;

4. The density of ceramic rubber composite plate is lower than that of steel plate, the weight is lighter, and because of its high wear resistance, it does not need to be replaced frequently, which saves a lot of time and cost for enterprises.

5. The lining steel plate is bolted, which has stronger impact resistance and does not fall off, which effectively solves the problem of aging of adhesive film glue or improper construction operation

It can well solve the problem of equipment wear and tear in the process of bulk material transportation.