Alumina ceramic wear-resistant tile construction
The wear-resistant ceramic construction is made of 92 alumina powder or 95 alumina powder and sintering aids, granulated by a granulator, then dry pressed into a block under a dry press and matching molds, and fired in a high temperature kiln at 1700 degrees. Made of white corundum wear-resistant ceramics. It is mainly used in industrial equipment such as power plants, cement, mines, etc., to protect the equipment from being worn, so as to achieve a longer service life of the equipment and reduce the loss caused by shutdown and maintenance.
Characteristics of alumina wear-resistant ceramics:
1. High hardness
Its Rockwell hardness is above HRA90 and its Mohs hardness reaches level 9, which is second only to diamond and far exceeds the wear resistance of wear-resistant alloy steel and ordinary wear-resistant steel.
Its density is 3.6g/cm3 or more, which is only half that of steel, which can greatly reduce the equipment load. At the same time, due to the low friction coefficient, it is beneficial to the stability and energy saving of the system.
3. Excellent wear resistance
Its wear resistance is equivalent to 300 times that of carbon steel and 100 times that of bimetal surfacing wear-resistant steel plates. After years of field application testing by our company, under the same working conditions, the service life of the equipment can be prolonged by more than ten times, and its wear is very low. , After the slag mill uses wear-resistant ceramics, its annual wear rate is less than 10%.
4. Strong bonding, good heat resistance
Wear-resistant ceramics are pasted on the inner wall of the equipment with heat-resistant superglue. It can run for a long time without aging at 285℃, and can be operated at a high temperature of 720℃ for a long time by welding and fixing. Its heat resistance and bonding strength are far ahead of the international indicators. At the same time, the wear-resistant ceramics that are welded by studs are almost non-existent. Fall off.
5. Easy to install and cost-effective
After the metal is polished and sandblasted, it is installed by special ceramic glue or welding. It can be operated regardless of the environment and geographical location, and the installation is simple. At the same time, alumina ceramics are a kind of ubiquitous in nature, the raw materials are very cheap, and the cost performance is very high.
6. Non-toxic, non-polluting, environmentally friendly wear-resistant material
Alumina ceramics is an environmentally friendly material, which does not pollute the environment and does not harm the workers. At the same time, it is worn out and directly enters the dust removal system without affecting the safe and stable operation of the equipment.
7. Wide range of application
Suitable for thermal power generation, steel smelting, machinery manufacturing, coal mines, petrochemicals, cement building materials, port logistics and other companies' material transportation, pulverizing systems, six flue and air channels, ash discharge and dust removal systems, and all mechanical equipment or systems that are worn out. Different types of products can be selected according to different needs. Our company also has a construction team with decades of anti-wear experience, excellent style and fine construction. Solve thousands of anti-wear projects, have professional construction qualifications, and professional personnel with special work permits to meet the needs of owners for anti-wear excellence.
Zibo Zhongze New Material Technology Co., Ltd. is located in Zibo High-tech Industrial Development Zone, Shandong Province. It is a comprehensive enterprise with alumina balls, filler balls, wear-resistant lining bricks, ZTA zirconium-aluminium composite ceramics and other produc···