Home>News>Industry information
Details of high alumina grinding ball
06-08-2021

High alumina grinding ball

The wear-resistant alumina ball is made of selected high-quality raw materials, advanced molding technology, and calcined in a high-temperature tunnel kiln. The product has the characteristics of high density, high hardness, low abrasion, good seismic stability and corrosion resistance. It is the most ideal grinding medium for processing glazes, blanks and various mineral powders. Products are widely used in ceramics, cement, coatings, refractory materials, inorganic mineral powders and other industries.

Pressed ball: wear-resistant alumina ball formed by cold isostatic pressing.

Rolling ball: wear-resistant alumina ball formed by rolling.

Brim: The forming marks formed on the surface of the wear-resistant alumina ball during cold isostatic pressing.

Radial size: the maximum diameter of the ball measured parallel to the direction of the ball cap.

Weft dimension: the maximum diameter of the ball measured perpendicular to the direction of the ball cap.

Sphericity: the ratio of the difference between the radial dimension and the latitude dimension of the pressed ball to the standard dimension.

Abrasion: The weight loss of the wear-resistant alumina ball after being ground in a polyurethane tank with water for a certain period of time.

 

product category:

According to the forming method: pressed ball, rolled ball, cylindrical ball

According to the specifications and size, it is divided into: big ball Φ≧20mm, small ball Φ<20mm

According to the alumina content, it is divided into 75 series, 90 series, 92 series, 95 series, and other series can also be produced according to the agreement.

usual format:

Rolling ball: Φ0.5, Φ1.0, Φ2, Φ3, Φ6, Φ8, Φ10, Φ13, Φ20, Φ25, Φ30, Φ40, other specifications can also be produced according to the agreement

Suppressed ball: Φ30, Φ40, Φ50, Φ60, Φ70, Φ80, Φ90, Φ100, Φ110, Φ120, other specifications can also be produced according to the agreement

Cylindrical ball: Φ20×20, Φ25×25, Φ30×30, Φ40×40, Φ50×50, Φ60×60, other specifications can also be produced according to the agreement

chemical filling ball8.jpg

Related News

24 hours at your service:

zawa@zbzawa.com

Contact Us