Erosion resistant and uneasy to fall off bite type ceramic wear-resistant tile
Ordinary wear-resistant ceramic tiles have a square sheet structure and are arranged in rows and columns. There are linear splices between the rows and columns of the wear-resistant ceramic tiles. The linear splices along the fluid flow direction constitutes an unobstructed fluid to flush the gap.
In addition to the normal wear of the surface of the wear-resistant ceramic tile by the fluid, the scouring gap becomes a breakthrough door for the side wear of the ceramic sheet by the fluid. The joint will gradually widen under the action of the fluid for a long time, and the degree of wear will become more and more serious. , The re-connection affects the service life of the wear-resistant ceramic sheet, and further affects the protective effect of the wear-resistant parts. After this kind of wear-resistant ceramic sheet is pasted, the adjacent ceramic sheets do not have occluding effect with each other. The paste is not firm during installation or is easy to fall off under the action of fluid washing. Frequent inspection and maintenance are required, and the construction quality is not easy to make certificate.
The purpose of the erosion-resistant and not easy to fall off bite-type wear-resistant ceramic sheet is to provide a kind of non-linear splicing seam along the fluid flow direction, which can reduce the degree of wear of the side of the ceramic sheet by the fluid, and make the ceramic sheet have a longer service life. Only the occlusal function between the adjacent ceramic pieces is not easy to fall off, and the construction quality proves that the bite-type wear-resistant ceramic pieces are not easy to fall off.
The technical solution is: it is composed of a square sticky paper and a plurality of wear-resistant ceramic sheets pasted on the sticky paper in vertical and horizontal rows. The two main surfaces of each wear-resistant ceramic sheet are parallel, flat and two opposite The side surfaces are parallel planes, and the other two opposite sides along the fluid flow direction during installation are respectively wavy curved surfaces that can be tightly joined to prevent the fluid from directly washing these two sides in a straight line direction.
The new technical effect is: this wear-resistant ceramic sheet will not form linear splices along the fluid flow direction, which can reduce the degree of wear on the side of the ceramic sheet by the fluid, and make the ceramic sheet have a longer service life. It has a bite effect and is not easy to fall off, and the construction quality is guaranteed.
During installation, it is necessary to make the linear splicing seam be perpendicular to the fluid flow direction, and the curved splicing seam is consistent with the fluid flow direction, without forming a straight scouring seam, which can prevent the fluid from scouring the side of the ceramic sheet and extend the wear-resistant ceramic The purpose of slice life. Due to the occlusion between adjacent ceramic sheets, they are not easy to fall off, and the effective use time of the wear-resistant tiles/linings can also be increased, which indirectly reduces the use cost.
Zibo Zhongze New Material Technology Co., Ltd. is located in Zibo High-tech Industrial Development Zone, Shandong Province. It is a comprehensive enterprise with alumina balls, filler balls, wear-resistant lining bricks, ZTA zirconium-aluminium composite ceramics and other produc···