Home>News>Industry information
What is the feature of wear-resistant tile?

Wear-resistant ceramic composite pipes and elbows are in the form of dried shrimp joint welded elbows. The ceramic part is designed by arching principle. The ceramic block forms a 360 degree mechanical self-supporting structure. The wear-resistant tile is close to the inner wall of the steel pipe. The contact surface edge of all ceramic blocks adopts a tapered design. The blocks are interlocked to ensure that the blocks will not Fall off.

The gap between the porcelain block and the inner wall of the steel pipe is filled with high-temperature wear-resistant cement, and the elbow can withstand the larger impact force generated by the material and use it under higher temperature conditions.


1, Wear resistance and service life

The selected alumina ceramic material has high hardness and good wear resistance. The wear resistance of the arched alumina ceramic elbow is 7 times that of stainless steel and 6 times that of cast steel. Its impact and wear resistance is equivalent to stainless steel, but it is significantly better than carbon steel, about 1.2 times that of cast steel, far better than cast stone, impact resistance is 8-16 times that of cast stone, and its weight is only wear-resistant alloy steel Half of it. One third of the cast stone pipe.

2, easy installation

3, Reasonable structure

Arched structure form 360 degrees, each porcelain plate is mutually squeezed and self-locking installation is more firm, the porcelain plate and the steel pipe are bonded and filled with high temperature wear-resistant cement, which has better impact resistance and high temperature resistance.

4,Low running resistance

The inner surface is smooth and never corroded, unlike the convex spiral on the inner surface of seamless steel pipe. The smoothness of its inner surface is better than that of any metal pipe and slightly lower than that of a seamless pipe. Therefore, it has the characteristics of low running resistance, which can reduce operating costs.

5, corrosion resistance, anti-scaling

α-AL2O3 is a neutral characteristic, and is a substance that has been oxidized. Therefore, it has acid and alkali resistance and seawater corrosion resistance, and also has anti-scaling properties.


Related News

24 hours at your service:


Contact Us